Celo

In Stock Now!

Celo Further Info

Celo work tables make partially used desks obsolete and allow your organisation to work more effectively within reduced real estate. Central to Smartworking is a collaborative worktable. Offering an ingenious solution to the need for work tables that are easily shared, adjacent and provide accessible storage, and more effective shared space.

Prices shown are square edge, Chamfered edge available at an additional charge.

Standard Product Information:
Legs: I-frame legs consists of a cast aluminium ski with steel column and frame, power coated silver.
Footspread on all work tables is 900mm
Feet: Each ski has two black, polypropylene glides.
These are adjustable upto 15mm to allow levelling.
Top Finish: Table tops available in melamine and veneer finishes. All tops are pressed on 25mm mdf board.
Melamine - White, Maple, Oak, Cherry, Walnut
Veneer - Maple, Beech, Oak, Cherry, Walnut
Grain Direction: All veneers are straight grain. Veneer/grain direction will run the length of the table.
Edge Details: Melamine Tops
Square Edge: 25mm thick
Chamfered Edge: 25mm thick mdf chamfer
Both edges are lipped in 2mm ABS matching the top.
Edge Details: Veneer Tops
Square Edge: 25mm thick
Chamfered Edge: 25mm thick mdf chamfer
Both edges are lipped in 2.5mm solid matching the top.
Locking: One barrel lock, supplied with two keys, allows each top to lock individually. Tables are available without locking as a cost down option.
Power Bin: The transulcent, polypropylene power bin is fitted with 2 power units. Each power unit contains two CAT5 data and two power sockets. The bin is available without power.
Divider: A polypropylene divider fits into the centre of the power bin and divides the bin in half.
Screen: A dividing screen attaches to the table across the centre of each power bin. The screen is either frosted plastic or upholstered fabric. Different colours are available. This is as an accessory.
Printer table: A printer stand attaches to either outside leg of the table and sites below the height of the table top. This is available as an accessory.
Cable Tray: A double sided cable tray fits to the crossbar beneath the power bin. The cable tray runs the length of the corssbar between two lege frames. This is available as an upcharge.
Leg cable riser: A U shaped cable riser snaps onto the leg column. This is available as an accessory.
Finishes: The printer table, cable tray and cable leg riser are steel, powder coated silver or stone to match the frame.
Umbilical cable riser: Transulcent, plastic rings with a weighted foot allow 4 way segregation of cables. This is available as an accessory.